The “PRESS START” thumbnail. Every glow, fringe, and flicker is modeled on how real display hardware behaves.
Arcade Surf Leaderboard
A retro arcade leaderboard where each effect comes from how a CRT screen and a VHS tape actually behave.
Context
Personal project, 2026
Role
Concept, research, visual and motion design, build
Tools
React and CSS in the browser, built with AI coding agents. AI is my general assistant for research and prototyping; I direct the work and test the result.
A retro arcade-style surfboard leaderboard, inspired by Hotline Miami. Rather than applying effects arbitrarily, I wanted each visual choice to be grounded in how CRT displays and analog recording actually work.
It has two parts: the leaderboard itself, with hover states, scrolling text, and tabs, and a "PRESS START" thumbnail that runs on my homepage.
Hovering rows and switching tabs. The glow, the sway, and the tracking glitches run the whole time.
Approach
I modeled the full signal chain, from light leaving the screen to someone watching a recording of it: phosphor emission, the CRT hardware, a camera lens, VHS tape, and the observer. Each stage contributes its own effects:
Electron beam. Voltage sag, convergence error between the three color guns, and beam-landing tints at the corners.
Phosphor. Glow around bright text, and a 60 Hz flicker with exponential decay.
Screen. Scanlines, the slot mask, red-green-blue phosphor stripes, and interlace.
Recording. Chromatic aberration from the lens, and VHS tracking bars and glitches.
Observer. A slow sway built from layered sine waves.
Near a corner
Nearer the middle
Up close: scanlines, phosphor stripes, and red and cyan fringes. Convergence error grows toward the edges, so the fringes are wider at a corner than in the middle.
Decisions
Effects respond to each other. Voltage sag rises and falls with the glow pulse, and at its brightest the glow fills the gaps between phosphor stripes, so the stripes fade. Tied together, the effects read as one screen. On independent timers they felt like decoration.
Position matters. Convergence error and the corner tints grow toward the edges, as they do on a real tube. Applied evenly across the screen, they looked flat.
Felt, not seen. I set each effect to an extreme to see what it did, then dialed it back until it was felt but not seen. The flicker ended at 3% intensity and the scanlines at about 4% opacity.
Next
Respect reduced motion. The flicker, sway, and glitches keep running when a visitor's system asks for less motion. They should settle.
Let long entries fit. Long board names and the details under each amount are cut off in their columns.
The research behind each effect, the code, and every tuning value are in the full process notes.